Skip to main content

What is Cisco Supervisor Engine?

Supervisor Engine is a module that is installed in the Cisco Chassis-based Catalyst Switches or Routers. Supervisor engine contains nearly all the same components of a fixed Cisco Switches or Routers. These Supervisor engines come in a variety of different types with different functionalities and are installed in the Switches/Router Chassis as per requirements of the network types.

 Benefits of Supervisor Engines
By installing Latest Supervisor Engines in your existing investments (Switches and Routers) you can scale system performance and integrate next-generation services into your Networks.
Within a single multilayer switch chassis, two supervisor modules with integrated route processors can be used to provide hardware redundancy. If an entire supervisor module fails, the other module can pick up the pieces and continue operating the switch.
The supervisor engine contains the following integrated daughter cards that perform forwarding and routing and provide the protocols supported on the router.

Cisco Supervisor Engine, Sup-2T

Policy Feature Card (PFC) is the forwarding plane and does the following:

Performs Layer 2 and Layer 3 forwarding.
Enforces access control list (ACL) functions.
Performs policing and marking for quality of service (QoS) traffic.

Multilayer Switch Feature Card (MSFC) is the control plane and does the following:
Performs routing for the chassis. The MSFC contains the route processor (RP) and Switch processor (SP) for the router.
Runs Layer 2 and Layer 3 protocols, such as the Spanning Tree Protocol (STP) and others.

You can View a 3D model of Catalyst 6500 Switch, here you can see how the Catalyst Switch 6500 looks like, Mount/Demount Supervisor engines, and other inserted modules, view short details of them by demounting from Chassis.
Labels:

Comments

Post a Comment

Popular posts from this blog

How to import Putty Saved Connections to mRemoteNG

Just started using mRemoteNG and its being very cool to connect to different remote connection with different protocols e.g Window Remote Desktop, VNC to Linux, SSH, HTTP connection etc. from a single application. As new user I configured some remote desktop connection which was quite easy to figure out. But when I wanted to add SSH connections, it came in my mind to import all of the saved connections in the putty. But I couldn't figure it out how can it be done, though it was quite easy and here are the steps. Open your mRemoteNG Create a folder if you want segregation of multiple networks Create a new connection Enter the IP address of remote server under connection in Config pane Under the config pane, select protocol " SSH version 2 ".  Once you select protocol to SSH version 2 you are given option to import putty sessions, as shown in the snap below. In the above snap, I have imported CSR-AWS session from my saved sessions in Putty.
1 comment
Read more

BGP Soft Reconfiguration vs. Route Refresh: Key Differences and Best Practices

In BGP (Border Gateway Protocol), managing route updates and reapplying new policies can sometimes be challenging, especially if you want to avoid resetting the BGP session. Two methods allow you to update routing policies without tearing down the session: BGP Soft Reconfiguration and BGP Route Refresh . While both methods serve the same purpose, they work differently and have distinct impacts on your router's resources. This post explains the key differences between Soft Reconfiguration and Route Refresh , when to use each, and why Route Refresh is preferred in most modern networks. 1. What is BGP Soft Reconfiguration? BGP Soft Reconfiguration is an older method of applying new policies (like route maps, filters, or prefix lists) without resetting the BGP session. It works by storing a local copy of all the routes received from a BGP neighbor before applying inbound policies. This local route copy allows the router to reprocess the routes when a policy change occurs. How So...
Post a Comment
Read more

Understanding PKI The Complete Process Explained

The Complete Public Key Infrastructure (PKI) Process: From Key Generation to Certificate Verification Public Key Infrastructure (PKI) is the backbone of secure communication on the internet. It ensures that sensitive data exchanged between clients and servers remains private and authentic. This blog post will guide you through the entire PKI process, from generating keys to verifying certificates and ensuring they haven't been revoked. 1. Key Pair Generation The first step in PKI is generating a public-private key pair using an asymmetric cryptographic algorithm, such as RSA or ECDSA: The private key is securely stored on the server and never shared. The public key is included in the certificate and shared with the Certificate Authority (CA) during the certificate request process. This key pair enables encryption and decryption, which are essential for secure communication. 2. Creating a Certificate Signing Request (CSR) The server creates a Certificate Signing Request (CSR) to...
Post a Comment
Read more